Forschung

The conversion of the district heating network in the Rhine-Ruhr area from being fossil-fueled to being supplied by renewable energy carriers is a major task. Integrating deep geothermal reservoirs into the grid could provide a future solution. Potential geological formations in the Rhine-Ruhr area include the Carboniferous and Devonian carbonates at depths of 3,000 m to 5.000 m. The research project Greener aims to identify the spatial distribution of the Devonian reef-facies in the Rhine-Ruhr area and its respective geoscientific properties. An outcrop analogue study is conducted which includes field research like fault and fracture analysis etc. and subsequent laboratory examinations analyze the thermal, hydraulic, mechanical and chemical properties of the aforementioned stratigraphic units under surface and reservoir conditions. These correlations provide valuable information about the rock characteristics at a certain depth and thus the overall reservoir potential of the Devonian carbonates.

Staff involved: K. Lippert, A. Immenhauser, R. Bracke and M. Nehler

About 70% of Earth's geological history is recorded in carbonate archives that have seen varying degrees of post-depositional dolomitization. Limestone-to-dolostone transition zones are important due to the inherent depositional and diagenetic information they contain. The insufficient understanding of lateral and stratigraphic patterns within these transition zones forms a limitation in carbonate research. Similarly, early diagenetic dolomicrites, which typically record marine environmental conditions, are in the focus of this project. When altered, burial conditions may overprint the original signature but then at least provide information on burial pathways. The objective of this study is to establish a detailed framework for limestone-to-dolostone transition zones and early diagenetic dolomites from different time intervals. Upstream, a well-constrained Mg-isotope data set from all early (marine) to late diagenetic (burial) carbonate phases and complementary geochemical data constrained within fluid property context are aimed for. In foresight, this project intends to establish robust and quantitative benchmarks to test the validity of various environmental proxies in dolomitized limestones and their associated facies. 

Staff involved: M. Müller and A. Immenhauser

Biomineralized tissues of marine organisms can record seawater properties (e.g., temperature) during growth making them ideal candidates for the reconstruction of paleoenvironments. Due to the accretionary growth of, e.g., brachiopods and molluscs, changes of the organism's habitat are also recorded, which allows for the reconstruction of habitats and lifestyles of exctinct organisms. This project focuses on ammonoids and belemnites, both extinct cephalopod groups, and additionally on organisms that occur together with them in the same depositional environment. During the Jurassic and Cretaceous, transgressions/regressions as well as warming/cooling phases and oceanic anoxic events took place. This makes both time periods ideal for studying the appearance, disappearance and distribution of taxa, changes in shell shape, microstructures and geochemical proxies (e.g., δ¹⁸O, δ¹³C, δ^44/40Ca). The main goals are to investigate the possible influence of changes of various paleo-ecological parameters (e.g., water depth, pH, temperature, oxygenation of the habitat zone) on marine organisms with respect to the temporal, geographical distribution, shell shape, geochemistry and microstructure.

Animated micro-CT of Nautilus pompilius

Staff involved: R. Hoffmann, S. Riechelmann, K. Stevens and A. Immenhauser

Cave carbonates of interest in this research project are cryogenic cave calcites (cryocalcites) and helictites (excentriques) from the 2019 discovered cave Windloch in Germany. Geochemical, petrographical, and crystallographical tools are used to gain insight into the formation conditions, whereas U/Th age dating provides information about the formation time. This project is performed in close cooperation with the Insitute of Geosciences, Johannes Gutenberg Universität Mainz and Arbeitskreis Kluterthöhle e.V.

Staff involved: S. Riechelmann, D. Buhl, A. Immenhauser, R. Hoffmann, D. Scholz (Universität Mainz) and S. Voigt (Arbeitskreis Kluterthöhle e.V.).

This project aims to precipitate carbonate crystals on watch glasses (closest to a stalagmite surface) in an experimental approach in the laboratory under cave analogue conditions in order to determine the influence of trace elements, organic compounds, and growth rate on calcite crystal morphology, crystal fabric, and the partition coefficient of different trace elements. Important tools for the realization of the project are the analysis of element concentrations, SEM, and EBSD.

Staff involved: O. Uwakwe, S. Riechelmann, D. Buhl, R. Hoffmann and A. Immenhauser

The goal of this research project is an improved understanding of the controlling factors of magnesium isotope (δ²⁶Mg) fractionation in for instance speloan carbonates or bivalve hard parts. The main focus is on the potential of this novel isotope system as a paleo-climatological, paleo-ecological and paleo-oceanographic proxy. 

Staff involved: S. Riechelmann, M. Müller, M. Dietzel (Graz) and A. Immenhauser

D. Buhl

Cryogenic cave calcites (CCC) grow from freezing cave waters where slow freezing leads to a very light O-isotope composition and quick freezing leads to higher O-isotope composition. Calcites of the first group have formed in Middle European caves in water pools on ice during the transition from cold to warm periods. After the ice had molten, a polymict "crystal sand" of cryogenic calcite particles is found as a residue on the cave ground. According to morphological and structural criteria, these particles can be distinguished as spherolitic, rhombohedral crystal, plait and skeletal crystal sinters. Our work has a mainly experimental approach.

Staff involved: S. Riechelmann, O. Uwakwe and A. Immenhauser

Light microscopic images of Watznaueria barnesiae of four sample sets (Lägerdorf, Höver, Wunstorf, Castrop-Rauxel), showing a progressive degradation with increasing temperatures

Mortar is the essential binding agent of human buildings all over the world. For producing mortars, three different components are utilised: a binder (lime, gypsum, mud, cement), aggregates (e.g. sand, rock fragments) and additives (pozzolans, organic materials). Lime, gypsum and mud are the three most common and historically oldest binding materials used for man-made constructions. Lime-based mortar consists of quicklime, which is produced by burning naturally occurring limestones at > 800°C. Calcareous nanno- and microfossils are not expected to be present in lime binders of mortars and mortar-based materials due to the high heating temperature. They have, however, been detected in thin sections, SEM images and smear slides of mortars.

The three main objectives of this project are to (i) establish the use calcareous nannofossils for provenance analysis of historic mortars, (ii) gain experimental data on the behaviour of calcareous nannofossils with increasing temperature related to the burning procedure and (iii) to use the experimental data on historic mortars to reconstruct the burning temperature during quicklime production. This project will thus contribute to a better understanding of historic mortar production.

Staff involved: J. Falkenberg and J. Mutterlose